In Exercises 5–8, use the following two control charts that result from testing batches of newly manufactured aircraft altimeters, with 100 in each batch. The original sample values are errors (in feet) obtained when the altimeters are tested in a pressure chamber that simulates an altitude of 6000 ft. The Federal Aviation Administration requires an error of no more than 40 ft at that altitude.


[IMAGE]


[IMAGE]


Is the process mean within statistical control? Why or why not?

Minting Quarters Specifications for a quarter require that it be 8.33% nickel and 91.67% copper; it must weigh 5.670 g and have a diameter of 24.26 mm and a thickness of 1.75 mm; and it must have 119 reeds on the edge. A quarter is considered to be defective if it deviates substantially from those specifications. A production process is monitored, defects are recorded and the accompanying control chart is obtained. Does this process appear to be within statistical control? If not, identify any out-of-control criteria that are satisfied. Is the manufacturing process deteriorating?

[IMAGE]

Control Charts for p. In Exercises 5–12, use the given process data to construct a control chart for p. In each case, use the three out-of-control criteria listed near the beginning of this section and determine whether the process is within statistical control. If it is not, identify which of the three out-of-control criteria apply.

Euro Coins Consider a process of minting coins with a value of one euro. Listed below are the numbers of defective coins in successive batches of 10,000 coins randomly selected on consecutive days of production.

32 21 25 19 35 34 27 30 26 33

Quarters. In Exercises 9–12, refer to the accompanying table of weights (grams) of quarters minted by the U.S. government. This table is available in Data Set 44 “Weights of Minted Quarters” in Appendix B.

Find the values of LCL and UCL for an xbar chart.

In Exercises 5–8, use the following two control charts that result from testing batches of newly manufactured aircraft altimeters, with 100 in each batch. The original sample values are errors (in feet) obtained when the altimeters are tested in a pressure chamber that simulates an altitude of 6000 ft. The Federal Aviation Administration requires an error of no more than 40 ft at that altitude.

[IMAGE]

[IMAGE]

Is the process variation within statistical control? Why or why not?

Energy Consumption. Exercises 1–4 refer to the amounts of energy consumed in the author’s home. (Most of the data are real, but some are fabricated.) Each value represents energy consumed (kWh) in a two-month period. Let each subgroup consist of the six amounts within the same year. Data are available for download at www.TriolaStats.com.

Energy Consumption: R Chart Let each subgroup consist of the 6 values within a year. Construct an R chart and determine whether the process variation is within statistical control. If it is not, identify which of the three out-of-control criteria lead to rejection of statistically stable variation.

Examine the following p chart for defective calculator batteries and briefly describe the action that should be taken.

Histogram of Interarrival Times Construct the histogram that corresponds to the frequency distribution from Exercise 1. Use class midpoint values for the horizontal scale. Does the histogram suggest that the data are from a population having a normal distribution? Why or why not?

In Exercises 1 and 2, use the following wait times (minutes) at 10:00 AM for the Tower of Terror ride at Disney World (from Data Set 33 “Disney World Wait Times” in Appendix B).

35 35 20 50 95 75 45 50 30 35 30 30

g. What level of measurement (nominal, ordinal, interval, ratio) describes this data set?