Compound X contains only the elements C, H, O, and S. A 5.00 g sample undergoes complete combustion to give 4.83 g of CO₂, 1.48 g of H₂O, and a certain amount of SO₂ that is further oxidized to SO3 and dissolved in water to form sulfuric acid, H₂SO₄. On titration of the H₂SO₄, 109.8 mL of 1.00 M NaOH is needed for complete reaction. (Both H atoms in sulfuric acid are acidic and react with NaOH.) (a) What is the empirical formula of X?

(b) When 5.00 g of X is titrated with NaOH, it is found that X has two acidic hydrogens that react with NaOH and that 54.9 mL of 1.00 M NaOH is required to completely neu-tralize the sample. What is the molecular formula of X?

A 1.268 g sample of a metal carbonate (MCO3) was treated with 100.00 mL of 0.1083 M sulfuric acid (H2SO4), yielding CO2 gas and an aqueous solution of the metal sulfate (MSO4). The solution was boiled to remove all the dissolved CO2 and was then titrated with 0.1241 M NaOH. A 71.02 mL volume of NaOH was required to neutralize the excess H2SO4. (a) What is the identity of the metal M?

(b) How many liters of CO2 gas were produced if the density of CO2 is 1.799 g/L?

Element M is prepared industrially by a two-step procedure according to the following (unbalanced) equations:

Assume that 0.855 g of M₂O₃ is submitted to the reaction sequence. When the HCl produced in step (2) is dissolved in water and titrated with 0.511 M NaOH, 144.2 mL of the NaOH solution is required to neutralize the HCl. (a) Balance both equations.

To 100.0 mL of a solution that contains 0.120 M Cr(NO3)2 and 0.500 M HNO3 is added to 20.0 mL of 0.250 M K2Cr2O7. The dichromate and chromium(II) ions react to give chromium(III) ions. (a) Write a balanced net ionic equation for the reaction.

(b) Calculate the concentrations of all ions in the solution after reaction. Check your concentrations to make sure that the solution is electrically neutral.

Sodium nitrite, NaNO2, is frequently added to processed meats as a preservative. The amount of nitrite ion in a sample can be determined by acidifying to form nitrous acid (HNO2), letting the nitrous acid react with an excess of iodide ion, and then titrating the I3 - ion that results with thiosulfate solution in the presence of a starch indicator. The unbalanced equations are (1) (2) (a) Balance the two redox equations.

Sodium nitrite, NaNO2, is frequently added to processed meats as a preservative. The amount of nitrite ion in a sample can be determined by acidifying to form nitrous acid (HNO2), letting the nitrous acid react with an excess of iodide ion, and then titrating the I3 - ion that results with thiosulfate solution in the presence of a starch indicator. The unbalanced equations are (1) (2) (b) When a nitrite-containing sample with a mass of 2.935 g was analyzed, 18.77 mL of 0.1500 M Na2S2O3 solution was needed for the reaction. What is the mass percent of NO2- ion in the sample?

Brass is an approximately 4:1 alloy of copper and zinc, along with small amounts of tin, lead, and iron. The mass per-cents of copper and zinc can be determined by a procedure that begins with dissolving the brass in hot nitric acid. The resulting solution of Cu2+ and Zn2+ ions is then treated with aqueous ammonia to lower its acidity, followed by addi-tion of sodium thiocyanate (NaSCN) and sulfurous acid (H2SO3) to precipitate copper(I) thiocyanate (CuSCN). The solid CuSCN is collected, dissolved in aqueous acid, and treated with potassium iodate (KIO3) to give iodine, which is then titrated with aqueous sodium thiosulfate (Na2S2O3). The filtrate remaining after CuSCN has been removed is neutralized by addition of aqueous ammonia, and a solu-tion of diammonium hydrogen phosphate ((NH4)2HPO4) is added to yield a precipitate of zinc ammonium phosphate (ZnNH4PO4). Heating the precipitate to 900 °C converts it to zinc pyrophosphate (Zn2P2O7), which is weighed. The equations are (1) (2) (3) (4) (5) (a) Balance all equations.

(b) When a brass sample with a mass of 0.544 g was sub-jected to the preceding analysis, 10.82 mL of 0.1220 M sodium thiosulfate was required for the reaction with iodine. What is the mass percent copper in the brass?

(c) The brass sample in part (b) yielded 0.246 g of Zn2P2O7. What is the mass percent zinc in the brass?

On heating a 0.200 g sample of a certain semimetal M in air, the corresponding oxide M2O3 was obtained. When the oxide was dissolved in aqueous acid and titrated with KMnO4, 10.7 mL of 0.100 M MnO4- was required for complete reac-tion. The unbalanced equation is (a) Balance the equation.

On heating a 0.200 g sample of a certain semimetal M in air, the corresponding oxide M2O3 was obtained. When the oxide was dissolved in aqueous acid and titrated with KMnO4, 10.7 mL of 0.100 M MnO4- was required for complete reac- tion. The unbalanced equation is X (b) How many moles of oxide were formed, and how many moles of semimetal were in the initial 0.200 g sample?

(c) What is the identity of the semimetal M?