(II) At t = 0, an 885-g mass at rest on the end of a horizontal spring (k = 184 N/m) is struck by a hammer which gives it an initial speed of 2.12 m/s. Determine
(b) the amplitude,

(II) A tuning fork oscillates at a frequency of 441 Hz and the tip of each prong moves 1.8 mm to either side of center. Calculate

(a) the maximum speed ..

(II) A tuning fork oscillates at a frequency of 441 Hz and the tip of each prong moves 1.8 mm to either side of center. Calculate

(b) the maximum acceleration of the tip of a prong.

(II) A 0.25-kg mass at the end of a spring oscillates 3.2 times per second with an amplitude of 0.15 m. Determine

(b) the speed when it is 0.10 m from equilibrium.

(II) At t = 0, an 885-g mass at rest on the end of a horizontal spring (k = 184 N/m) is struck by a hammer which gives it an initial speed of 2.12 m/s. Determine

(a) the period and frequency of the motion,

(II) A 0.25-kg mass at the end of a spring oscillates 3.2 times per second with an amplitude of 0.15 m. Determine

(d) the equation describing the motion of the mass, assuming that at t = 0, 𝓍 was a maximum.

(III) A glider on an air track is connected by springs to either end of the track (Fig. 14–41). Both springs have the same spring constant, k, and the glider has mass M.

(a) Determine the frequency of the oscillation, assuming no damping, if k = 125 N/m and M = 215 g.

<IMAGE>

(III) A mass m is at rest on the end of a spring of spring constant k. At t = 0 it is given an impulse J by a hammer. Write the formula for the subsequent motion in terms of m, k, J, and t.

(II) At t = 0, an 885-g mass at rest on the end of a horizontal spring (k = 184 N/m) is struck by a hammer which gives it an initial speed of 2.12 m/s. Determine

(c) the maximum acceleration,