Pure iron crystallizes in a body-centered cubic structure, shown in the figure. but small amounts of impurities can stabilize a facecentered cubic structure. Which form of iron has a higher density?

Verified step by step guidance

Identify the two types of crystal structures mentioned: body-centered cubic (BCC) and face-centered cubic (FCC).

Recall the formula for density: \( \text{Density} = \frac{\text{Mass}}{\text{Volume}} \).

Determine the number of atoms per unit cell for each structure: BCC has 2 atoms per unit cell, and FCC has 4 atoms per unit cell.

Calculate the volume of the unit cell for each structure using the lattice parameter \( a \): For BCC, \( a = \frac{4r}{\sqrt{3}} \), and for FCC, \( a = \frac{4r}{\sqrt{2}} \), where \( r \) is the atomic radius.

Compare the densities by considering the mass of the atoms in the unit cell and the calculated volume for each structure.

Verified video answer for a similar problem:

This video solution was recommended by our tutors as helpful for the problem above.

Video duration:

Was this helpful?

Key Concepts

Here are the essential concepts you must grasp in order to answer the question correctly.

Crystal Structure

Crystal structure refers to the orderly arrangement of atoms in a crystalline material. In body-centered cubic (BCC) structures, atoms are located at the corners of a cube with one atom at the center, while in face-centered cubic (FCC) structures, atoms are at the corners and the centers of each face of the cube. The arrangement affects properties like density and packing efficiency.

Density Calculation

Density is defined as mass per unit volume (density = mass/volume). The density of a crystalline material can be influenced by its atomic arrangement and the mass of the atoms involved. In general, FCC structures tend to have higher packing efficiency than BCC structures, which can lead to differences in density between the two forms of iron.

Effect of Impurities

Impurities in a material can alter its crystal structure and properties. In the case of iron, small amounts of certain impurities can stabilize the FCC structure, which typically has a higher density than the BCC structure. Understanding how impurities affect the arrangement of atoms is crucial for predicting changes in physical properties like density.

Recommended video:

Guided course

01:26

Photoelectric Effect

Related Practice

Textbook Question

Selected chlorides have the following melting points: NaCl (801 °C), MgCl₂ (714 °C), PCl₃ (-94 °C), SCl₂ (-121 °C) (a) For each compound, indicate what type its solid form is (molecular, metallic, ionic, or covalent-network).

Textbook Question

Imagine the primitive cubic lattice. Now imagine pushing on top of it, straight down. Next, stretch another face by pulling it to the right. All angles remain 90°. What kind of primitive lattice have you made?

Textbook Question

Introduction of carbon into a metallic lattice generally results in a harder, less ductile substance with lower electrical and thermal conductivities. Explain why this might be so.

Textbook Question

For each of the intermetallic compounds shown in Figure 12.17 determine the number of each type of atom in the unit cell. Do your answers correspond to the ratios expected from the empirical formulas: Ni3Al?

Textbook Question

What type of lattice—primitive cubic, body-centered cubic, or face-centered cubic—does each of the following structure types possess: (e) ZnS?