Suppose a certain car has a track width of 1.6 m and a center of gravity located 0.40 m above the center of the track. What is the critical angle for this car?

A uniform 95-kg flagpole of length 8.4 m is being erected by pulling on a rope attached 2/3 of the way to the top (Fig. 12–94). When the pole is inclined at 35° and the rope makes an angle with the ground of 18°, what is the tension in the rope?

<IMAGE>

The cm of a 95,000-kg train locomotive starts across a 260-m-long bridge at time t= 0 . The bridge is a uniform beam of mass 23,000 kg and the train travels at a constant 80.0 km/h. What are the magnitudes of the vertical forces, F_A(t) and F_B(t), on the two end supports, written as a function of time during the train’s passage?

A 200 kg, 10 m-long beam is held at equilibrium by a hinge on the floor and a force you apply on it via a light rope connected to its edge, as shown. The beam is held at 53° above the horizontal, and your rope makes an angle of 30° with it. Calculate the angle that the Net Force of the hinge makes with the horizontal (use +/– for above/below +x, and use g=10 m/s².)

(III) A refrigerator is approximately a uniform rectangular solid 1.9 m tall, 1.0 m wide, and 0.75 m deep. If it sits upright on a truck with its 1.0-m dimension in the direction of travel, and if the refrigerator cannot slide on the truck, how rapidly can the truck accelerate without tipping the refrigerator over? [Hint: The normal force would act at one corner.]

A uniform 95-kg flagpole of length 8.4 m is being erected by pulling on a rope attached 2/3 of the way to the top (Fig. 12–94). When the pole is inclined at 35° and the rope makes an angle with the ground of 18°, what is the tension in the rope?

<IMAGE>