A gas in a cylinder expands from a volume of 0.110 m^3 to 0.320 m^3 . Heat flows into the gas just rapidly enough to keep the pressure constant at 1.65 * 10^5 Pa during the expansion. The total heat added is 1.15 * 10^5 J. (a) Find the work done by the gas.

Five moles of an ideal monatomic gas with an initial temperature of 127°C expand and, in the process, absorb 1500 J of heat and do 2100 J of work. What is the final temperature of the gas?

Propane gas (C3H8) behaves like an ideal gas with g = 1.127. Determine the molar heat capacity at constant volume and the molar heat capacity at constant pressure

Heat Q flows into a monatomic ideal gas, and the volume increases while the pressure is kept constant. What fraction of the heat energy is used to do the expansion work of the gas?

Boiling Water at High Pressure. When water is boiled at a pressure of 2.00 atm, the heat of vaporization is 2.20 * 10^6 J/kg and the boiling point is 120°C. At this pressure, 1.00 kg of water has a volume of 1.00 * 10^-3 m^3 , and 1.00 kg of steam has a volume of 0.824 m^3. (a) Compute the work done when 1.00 kg of steam is formed at this temperature.

Six moles of an ideal gas are in a cylinder fitted at one end with a movable piston. The initial temperature of the gas is 27.0°C and the pressure is constant. As part of a machine design project, calculate the final temperature of the gas after it has done 2.40 * 10^3 J of work.

A rapidly spinning paddle wheel raises the temperature of 200 mL of water from 21°C to 25°C . How much (a) heat is transferred?

FIGURE P19.62 shows a thermodynamic process followed by 120 mg of helium.b. How much work is done on the gas during each of the three segments?