A 1125-kg car and a 2250-kg pickup truck approach a curve on a highway that has a radius of 225 m. (a) At what angle should the highway engineer bank this curve so that vehicles traveling at 65.0 mi/h can safely round it regardless of the condition of their tires? Should the heavy truck go slower than the lighter car?

An airplane traveling at 510 km/h needs to reverse its course. The pilot decides to accomplish this by banking the wings at an angle of 38° while moving in a level circular path.

<IMAGE>

(a) Find the time needed to reverse course.

A car drives at a constant speed around a banked circular track with a diameter of 145 m. The motion of the car can be described in a coordinate system with its origin at the center of the circle. At a particular instant the car’s acceleration in the horizontal plane is given by

a→ = (-15.7 î - 23.2 ĵ)m/s² .

(b) Where (x and y) is the car at this instant?

Consider a train that rounds a curve with a radius of 530 m at a speed of 160 km/h (approximately 100 mi/h ).

(b) Calculate the friction force on the passenger if the train tilts at an angle of 8.0° toward the center of the curve.

A bobsled turn banked at 78° is taken at 24 m/s. Assume it is ideally banked and there is no friction between the ice and the bobsled. Calculate the centripetal acceleration of the bobsled.

A car drives at a constant speed around a banked circular track with a diameter of 145 m. The motion of the car can be described in a coordinate system with its origin at the center of the circle. At a particular instant the car’s acceleration in the horizontal plane is given by

a→ = (-15.7 î - 23.2 ĵ)m/s² .

(a) What is the car’s speed?

(II) How large must the coefficient of static friction be between the tires and the road if a car is to round a level curve of radius 85 m at a speed of 95 km/h?

A banked curve of radius R in a new highway is designed so that a car traveling at speed v₀ can negotiate the turn safely on glare ice (zero friction). If a car travels too slowly, then it will slip toward the center of the circle. If it travels too fast, it will slip away from the center of the circle. If the coefficient of static friction increases, it becomes possible for a car to stay on the road while traveling at a speed within a range from vₘᵢₙ to vₘₐₓ . Derive formulas for vₘᵢₙ and vₘₐₓ as functions of μₛ, v₀ and R.