The figure shows the cycle of a heat engine that uses a diatomic gas. The temperature at point 1 is $350\mathrm{K}$. What is the thermal efficiency of the engine?

The heat engine shown in FIGURE P21.62 uses 2.0 mol of a monatomic gas as the working substance.b. Make a table that shows ∆Eₜₕ, Wₛ, and Q for each of the three processes.

The heat engine shown in FIGURE P21.62 uses 2.0 mol of a monatomic gas as the working substance.c. What is the engine's thermal efficiency?

A heat engine with 0.20 mol of a monatomic ideal gas initially fills a 2000 cm³ cylinder at 600 K. The gas goes through the following closed cycle:Isothermal expansion to 4000 cm³.Isochoric cooling to 300 K.Isothermal compression to 2000 cm³.Isochoric heating to 600 K.How much work does this engine do per cycle and what is its thermal efficiency?

The cycle in the figure shows four processes. Process a is an isobaric expansion at $330\mathrm{kPa}$. Process b is a constant volume reduction in pressure to $100\mathrm{kPa}$. Process c returns the gas to its original state where the volume is $100{\mathrm{cm}}^3$. If the gas does $15\mathrm{J}$ of work each cycle, what is the maximum volume of the gas?

A heat engine does 200 J of work per cycle while exhausting 400 J of waste heat. What is the engine's thermal efficiency?

A Boeing 777 jet engine, the world's largest, has a power output of 82 MW. It burns jet fuel with an energy density of 43 MJ /kg. What is the engine's fuel consumption rate, in kg/s, if its efficiency is 30%?

The power output of a car engine running at 2400 rpm is 500 kW. How much (a) work is done and (b) heat is exhausted per cycle if the engine's thermal efficiency is 20%? Give your answers in kJ.